- 28 -
Pic 3.3.3.0 Netservice
【
PPPoE setup
】
Pic 3.3.3.1 PPPOE
Enable
：
Reverse
■
means choose,setting can become effective.
Input the user name and password that ISP
（
Internet service provider
）
provides. After saving it
reboot up your system. Then the NVR will build a network connection based on PPPoE. The IP address
will change into dynamic IP address after above operation is well done.
Operation
：
After PPPoE dialing successfully look up the IP address in the [IP address] and obtain the
current IP address. Then use this IP address to visit the NVR through user port.
【
NTP setup
】
Pic 3.3.3.2 NTP setup
The NTP server must be installed in the PC.
