
10
mobile phone will automatically shut down.
1) Plug one end of the charger into the household power
socket, and the other end is inserted into the jack on the
lower side of the mobile phone.
2) When charging the battery, the battery power indicator on
the screen start rolling until the battery is full
3) After the charging is finished, pull out the plug, and the
charger is removed from the power socket.
3.3 Insert SIM Card
The phone supports the same time to insert two SIM cards,
the same installation / removal method.
When the following steps are carried out, make sure that the
phone's power is off, in case of no charge.
- Remove the battery.
- The gold contact of th e SIM card is downward, and the
notch of the card corresponds to the notch of the card slot,
and the SIM card is put into the card slot.
Install the battery.
※
Remarks:
a) SIM cards and contacts are easily damaged by scratching
or bending, so be careful when using, inserting, or taking out
a SIM card.
b) When not using a mobile phone, please put the SIM card
in the place where children can't get it.
c) Please do not make SIM card in contact with static
electricity, dust or water immersion.
d) Before inserting or taking out the SIM card, please turn
off the mobile phone. Otherwise it will damage the memory