![background image](http://html1.mh-extra.com/html/sigma/sa-5/sa-5_manual_1267807007.webp)
.
If you press both buttons simultaneously again, the illumination will disappear.
If you press any button or turn the dial while Illuminating the LCD, the illumination will continue for an
additional 6 seconds.
During the charging of the built in flash, the LCD will not Illuminate.
At very low temperatures you that due to the nature of the LCD it may take slightly longer to respond - this is
not a function problem, but a characteristic of LCDs.
BASIC OPERATION
1. Insert the battery
Insert the battery into the chamber, aligning the + and - marks as indicated
2. Mount the lens
Align the red mark on the camera's mount with the alignment dot on the
lens. Engage the lens in the mount by turning the lens clockwise until it
clicks into the locked position.
3. Set the lens switch to the AF position.