![background image](http://html1.mh-extra.com/html/sigma/sa-5/sa-5_manual_1267807049.webp)
REPLACING THE DATA BACK BATTERY
This data back uses a 3V CR2025 Lithium battery
.
1.
Open the battery compartment cover by inserting the tip of a small
screwdriver or similar tool.
2.
Replace the battery. Be sure the (+)
end is up
3.
Attach and push the battery compartment cover until snaps and locks.
Check to see that numbers are displayed on the Data Panel LCD.
4
. If not, press the MODE, SELECT and ADJUST buttons altogether at
the same time.
After replacing a data back battery, you need to reset the calendar/clock.