4.
Once set the Auto Bracketing is maintained until you set the bracketing amount 0.0 or set the mode dial to
the
L
position.
The exposure compensation will be applied as follows in the camera's 4 modes.
P mode: Both shutter speed and aperture value will be changed.
S mode: Only aperture value will be changed.
A mode: Only shutter speed will be changed.
M mode: Only shutter speed will be changed.
If the bracketing amount is out of the range of the shutter or aperture settings the indicator will blink and will
show the limiting values. Pictures will use these limit values.
You can use Auto Bracket with Exposure Compensation.
If you set the Exposure Compensation while you set the Auto Bracketing, the bracketing amount will be shifted
by the amount of the exposure compensation. You can read the compensation and bracketing amount from the
exposure meter.
If the combined compensation amount is more than 2 stops, the exposure meter will indicate
<
or
>
Bracketing amount 1.0 stop with +1.0 stop compensation
Bracketing amount 2.0 stops with +1.5 stops compensation
If you set a small bracketing amount with negative type films, it will have almost no effect on the pictures'
appearance.
If you use the built-in flash, the auto bracket is overridden. The camera will take a single picture at the correct
exposure.
You can combine the auto bracket with self-timer and remote control modes.
4www.butkus .org
The focusing distance and exposure value is memorized when the shutter button is pressed. If the subject moves