Sigma ONYX EASY, Manual

Page: 39 / 192

ONYX Easy Manual_GB 09.02.2007 16:52 Uhr Seite 8
C M Y CM MY CY CMY K
PAGE 7
2.2 Key allocation and
navigation principle
The ONYX EASY uses three menu levels. When
navigating through the menus and sub-menus of the
ONYX EASY the user can always refer to the tree
diagram in Chapter 2.1 “Function summary”.
The menu navigation on the ONYX EASY is made much
simpler by the navigation level. The navigation level
always appears when you press one of the two upper
function buttons.
The possible button functions for the two upper buttons
are shown in the navigation level in order to:
k
Move to the next deeper level (ENTER)
k
Go back to the next higher level (BACK/OFF)
k
Start training (START)
k
End training (END)
Confirm the function shown in the navigation level by
pressing the button again. Use the two lower buttons
PLUS/MINUS to change between the individual menu
options on one level.
Your ONYX EASY is classified into 4 main menus –
“Training”, “Time”, “Memory” and “Setting”.
The symbol and description on the screen indicates
where you are in the main menu. Use the PLUS/MINUS
buttons to change between the individual main menus.
ENGLISH