![background image](http://html.mh-extra.com/html/sigma/chef-10/chef-10_use-and-maintenance-instruction-manual_1267775006.webp)
Instructions manual CHEF 10 VVE
6 of 19
INSTRUCTIONS FOR USE
To be able to work; the bowl must be mounted and the bowl protective grid closed. Otherwise it will be
blocked by the safety systems.
DO NOT REMOVE OR TAMPER WITH THE ELECTRICAL OR MECHANICAL GUARDS OR SAFETY
DEVICES ON THE MACHINE.
The bowl must be in position before the tools. It must be inserted with the bowl lever down,
inserting the appropriate pin welded onto the bowl into the hole on the support arc.
Complete positioning by having the holes on the bowl support plates match with the
centring pins. Block the bowl with the handles.
If it was not previously done, rotate the protective grid of the bowl to the open
position and, after having chosen the tool, insert it into the tool holder shaft.
Once it is inserted, turn the tool clockwise, having the transmission pin enter
the work position as indicated in the figure. Lower it and insert the tool lock
ring.
Using the lever, lift the bowl to the work position and close the protective grid of the bowl. At
this point, after inserting the ingredients, start the work cycle.
ELECTRICAL
PANEL
WITH SIX
PROTECTION
GRID
BOWL
LOCKING
HANDLES
LIFTING LEVER
SPEED CHANGE WITH
THE INVERTER INSIDE
THE UPRIGHT