Instructions manual CHEF 10 VVE
12 of 19
The following conditions constitute improper use of the mixer:
•
Loading more than what is allowed or use of unsuitable ingredients.
•
Cleaning with unsuitable tools or instruments that can scratch the bowl or damage the mixer or paint.
•
Use of the mixer in unsuitable places.
Modality for granting the warranty
If the customer finds defects in the mixer, he must immediately inform the supplier, who will carry out a quick
analysis of the lack of compliance and will establish the intervention mode with the customer.
After agreement with the supplier, the customer must provide him with the needed time and opportunity to
carry out modifications, improvements, repairs or the supply of spare parts which the supplier deems
reasonably necessary. If this does not occur, the supplier will not be held liable.
Parts subject to wear
Some components are scaled for a life duration far longer than that of normal mixer use during the time of its
warranty. Breakage or malfunctioning of these pieces depends on their use. They are therefore considered
parts subject to wear and are not included in the warranty, unless they manifest evident defects in the parts
or machinery.
The parts subject to wear are: transmission belts, motors, bearings and bowl.
CLEANING AND MAINTENANCE OPERATIONS.
CONTROL OF INSTALLED SAFETY SYSTEMS AND ELECTRICAL SYSTEM
The installed safety systems and the electrical system are subject to periodical checks carried out by
a specialised electrician.
Key of control intervals:
(INTERVAL)
Key of how to carry out the controls:
(METHOD)
d = daily.
w = weekly.
m = monthly.
a = annually.
O = observation: requires simple eye check (i.e. alarm light)
F = Function: requires a physical control of the action (i.e. pressing the
emergency button the mixer must stop)
M = Measurements: requires a control with an appropriate instrument (i.e.
control of earthing values).
Master switch.
Purpose: protection of power line.
Function: this equipment separates the machinery from the mains, it is placed on
the upright of the mixer, downstream the differential protection board.
Stop circuit and safety micro switch of grid.
Purpose: to stop the mixer immediately and unconditionally. Function: pressing
the STOP button or lifting the protective grid cuts the motor power, stopping the
mixer totally and not systematically. To restore functioning of the machinery, the
operator must start the cycle once again by pressing the START button.
Controls of system
Periodically the mixer's automation functioning and earthing must be checked.
The operating modes, safety functions, terminal board contacts need to be
controlled as well as the integrity of the cables, luminous LEDs and earthing
system.
Control
Interval
Method
a
F
Control
Interval
Method
m
F
Control
Interval
Method
a
F, M
