![background image](http://html1.mh-extra.com/html/sigma/134226/134226_operating-manual_1267882028.webp)
2-16KC
Using the Centrifuge
28
Version 03/2010, Rev. 1.7 of 27/01/2012
Translation of the original operating manual
6.3.3 Manual Mode
6.3.3.1 Starting a Centrifugation Run
The centrifuge is ready for operation when the start key is illuminated.
Press the start key in order to start a centrifugation run.
6.3.3.2 Interrupting a Centrifugation Run
Press the stop key in order to interrupt a centrifugation run. The
centrifugation run will be terminated prematurely.
Fast stop:
Press the stop key for more than one second.
The centrifuge decelerates with the maximum deceleration curve.
"Fast stop" appears in the display.
After a fast stop, the centrifuge lid must be opened before starting a
new centrifugation run.
6.3.3.3 Interrupting a Deceleration Process
Press the start key during a deceleration process in order to
interrupt it and to restart the centrifuge.
6.3.3.4
Selection, Display, and Modification of Data
The display is in its default state. No area is inverted.
Select a parameter by pressing or turning the function knob. The
selected field will be inverted.
Press the function knob in order to activate the modification
mode. "SET" and the selected area will be inverted.
Turn the function knob until the desired value is displayed.
Press the function knob to confirm the selected value and to quit
the modification mode. "SET" and the selected area will be
deactivated.
After 20 seconds, the modification mode will be left automatically.
The current values will be saved.
All entries beyond the permissible limits, or incorrect entries, will not
be accepted.