2-16KC
Short Operating Instructions
Page 2
Version 03/2010, Rev. 1.0 - sb
English
translation
5.
Enter run parameters:
Manual Mode
•
Select a parameter by pressing or turning the function knob. The selected field will be
inverted.
•
Press the function knob in order to activate the modification mode. "SET" and the
selected area will be inverted.
•
Turn the function knob until the desired value is displayed.
•
Press the function knob to confirm the selected value and to quit the modification
mode. "SET" and the selected area will be deactivated.
Program Mode
•
Select the program field ("PROG-") and confirm the selection.
•
Turn the knob. As a result, all of the programs that have already been saved and the
current ("--") setting will be displayed one after the other.
•
Select a program and confirm the selection. A dialog box will be displayed.
•
Select "LOAD" and confirm the selection.
6.
Press the start key to start a centrifugation run.
7.
Parameter values can be modified during the centrifugation run as described under
"Manual Mode" in this document.
8.
The centrifugation run can be interrupted at any time by pressing the stop key.