SIGLENT
12 SPD3000X QuickStart
2.2 CH1/CH2 Independent Output
Instruction
CH1 and CH2 are working in the independent mode, at the same time
，
they
are insulated from the ground.
Output rating 0~32V/0~3.2A
Operation steps
1. Make sure that parallel/series mode is off.
2. Connect load to the positive and negative terminals of CH1/CH2.
3. Set voltage and current value of CH1/CH2:
a) Press
“1”/”2” button to select the wanted channel
b) Move the cursor through direction button to select the wanted
parameter(voltage, current),
c) P
ress “Fine” to select the digit position and then revolve the
multi-function knob to change the corresponding parameter.
4. turn on the output
：
Press
“on/off” button to turn on the output, the corresponding indicator light
gets lighted immediately and
“CC” or “CV” is showed on the current
interface.
Summary of Contents for SPD3303X
Page 2: ......
