SIGLENT
SPD3000 User Manual 23
Chapter 3 Remote control
The SCPI Commands are used to perform remote control through USBTMC.
Connect the USB device on the rear panel to computer which has been
installed with EasyPower software or NI
（
Measurement & Automation
）
.
3.1 Command list
1. *IDN?
2. *SAV
3. *RCL
4. INSTrument {CH1|CH2}
5. INSTrument ?
6. MEASure:CURRent?
7. MEAsure:VOLTage?
8. MEASure:POWEr?
9. [SOURce:]CURRent <current>
10. [SOURce:]CURRent ?
11. [SOURce:]VOLTage <volt>
12. [SOURce:] VOLTage?
13. OUTPut
14. OUTPut:TRACk
15. OUTPut:WAVE
16. TIMEr:SET
17. TIMEr:SET?
18. TIMEr
19. SYSTem:ERRor?
20. SYSTem:VERSion?
21. SYSTem: STATus?
www.biall.com.pl
