SIGLENT
SPD3000 User Manual 7
Notice in first use of SPD3000 Series
To ensure that the instrument can work normally,, you need to undertake the
necessary inspection before using the SPD3000.
Input power requirement
The SPD3000 series allows two kinds of frequency that are 50hz and 60hz,
four kinds of AC power that are 100v
、
110v
、
220v and 230v. You can
choose
the different input power
with the “DIP switch ”at the rear panel according to
your actual requirement.
Warning
Pease disconnect the power cords at first and then
dial the code to
the corresponding gear
if you want to change a new power supply.
Electrical check
Please use power cord provided as accessories and connect the instrument to
AC power first, and then starting power check according to the following steps.
1. Connect the power supply
Warning
To avoid electrical shock, please make sure that the instrument
has
been properly earthing
.
2. Turn on the power switch
Press the button “POWER” to enter boot interface, and the default setup
will show automatically after a while.
www.biall.com.pl
