SIGLENT
SPD3000 User Manual 11
2.2 CH1/CH2 Independent Output
Instruction
CH1 and CH2 are working in the independent mode, at the same
time
，
they are insulated from the ground.
Output rating 0~30V/0~3A (max:32V, 3.2A)
Operation steps
1. Make sure that parallel/series mode is off.
2. Connect load to the positive and negative terminals of CH1/CH2.
3. Set voltage and current value of CH1/CH2: Firstly, move the cursor to
select the wanted parameter(voltage,current), and then revolve the
multi-function knob to change the corresponding parameter(you can press
“FINE” to make accurate adjusting).
Coarse adjusting: 0.1V or 0.1A each step.
Fine adjusting: the least precision each step.
4. Open output
：
Press “ON/OFF” button to turn on the output, the
corresponding indicator light gets lighted immediately and “CC” or “CV” is
showed on the current interface.
www.biall.com.pl
