SIGLENT SDS1000CML+, User Manual, Page: 91 / 159

SIGLENT
SDS/SD User Manual
81
■ Save waveforms to USB flash drive
Table 2-45 Save waveforms to USB flash drive function menu
：
Option Setup
Introduction
Type Waveforms
Menu for the Storage/Recall waveforms.
Save to File
Save waveforms to USB flash drive.
Save
Accomplish the storage.
Picture 2.12-10
Save waveforms to USB flash drive, follow next steps:
1
）
Input a sine signal to channel 1, press the “AUTO” button.
2
）
Press the “SAVE/RECALL” button to enter the “SAVE/RECALL” display menu.
3
）
Press the “Type” option button to select “Waveforms”.
4
）
Insert USB flash drive to USB host port of the oscilloscope and wait that the
oscilloscope has initialized USB flash drive (about five seconds).
5
）
Press the “Save to” option button to select “File”.
6
）
Press the “Save” option button then you’ll go into the Save/Recall interface.
7
）
Create a file then press the “Confirm” button (about five seconds, there is a
prompting message that “Save data success” displaying on the screen), now
waveform data have been saved to USB flash drive