EAN-1500-OEM-Startup-Guide
© SightLine Applications, Inc.
2
Configuration notes:
•
If a wireless adapter is active on the host PC it should be disabled.
•
If using the link local address, assign a static IP address to the host PC of 169.254.X.X, where X is 1-
254 (do not use 180). Use a subnet mask of 255.255.0.0.
•
Problems with outbound streaming are often related to setting/assigning IP addresses and ports.
See the Encoding Configuration settings in
3
Serial Communications
For a direct serial connection use the 9-pin serial connection.
Connecting to the serial COM port on the 1500-AB board from a host PC requires a null modem
adapter or null modem serial cable (
Figure 2
).
Use a direct serial connection for troubleshooting or if a network connection cannot be established.
Figure 2: 1500-AB Board Serial COM Connection
4
1500-EVAL Kit
Parts listed below are included in the 1500-EVAL kit. If your application calls for other options and
interface boards, please contact
To review all the interface board options, see the
Applications website.
Table 1: 1500-EVAL Kit
Part Number
Qty
Description
1500-OEM + 1500-SOM (Rev E)
1
Video processing board
1500-AB (Rev H and later)
1
Accessory board with standard connections for the 1500-OEM
SLA-CAB-1514
1
Molex round wire cable
SLA-MSD-32GB
1
SD Card for recording clips and snapshots
SLA-PWR-B05V
1
5V Power supply for 1500-AB board
SLA-CAB-2RCA
2
RCA (M) to RCA (M) video cables
SLA-CAB-ETH0
1
Ethernet cable CAT 5e 3ft
SLA-MSD-ADPT
1
SD adapter
SLA-CAB-0303
1
Cable, 3P Molex to 9P D-sub
SLA-1500-HSNK
1
1500-OEM heatsink (COTS) (recommended for benchtop testing)
J7 (9-pin)
Null Modem
Serial Cable
to PC
Serial 0
1500-AB
Board
Null Modem
Adapter
