EAN-1500-OEM-Startup-Guide
© SightLine Applications, Inc.
6
4.
Network connection to the board:
a.
From the
Connect
tab, click the
Refresh List
button to get a list of boards on the network.
b.
Use the dropdown menu and click on the appropriate board to select it.
c.
Click the
Disconnected (click to connect)
button.
Once the connection is successful, the button changes to Connected.
Figure 7: Network Connection to Board
5.
Verify the connection. When the Panel Plus has successfully connected to the 1500-OEM board,
operating information is displayed under the
Video Output
section and the bottom status bar in
Panel Plus. If the connection was not successful, this information will not be present or incomplete.
IMPORTANT:
For optimal performance, monitor the board temperature. Board temperatures
should be below 185°F (85°C). To keep boards within the optimal temperature range, use the
included heatsink during bench testing. For more information about thermal management, see the
Figure 8: Operating Information
App bit code
with listed
features
Firmware Ver: 3.3.1.6 FPGA:08, temp: 125°F [37°C]
SVN Revision: 58309, Build Date: 01/11/2021, Build Time:
4:48:51
Operating
information
