EAN-1500-OEM-Startup-Guide
© SightLine Applications, Inc.
7
6.1
Camera Setup and Network Selection
1.
From the main menu go to
Configure » Aquisition Settings.
This dialog window allows changes to
the camera configurations.
2.
Select the
Camera Index (Analog 0 or Analog 1)
and
Camera Type
(
NTSC
or
PAL
).
3.
After changes have been made, the
Apply
button will turn red indicating that a change has been
detected. Click
Apply
to apply the changes.
4.
Save and activate the settings:
a.
Main menu »
Parameters
»
Save to Board
.
b.
Main menu »
Reset
»
Board
.
c.
After the system reboots reconnect to the board. Make sure the board connects.
for a comprehensive guide to saving parameter settings.
for all third-party cameras and lens assemblies that are currently
supported by SightLine software. Includes configuration and setting support guidance.
5.
From the
Connect
tab, click
Stream Network Video
to This PC.
6.2
Direct serial connection (optional):
1.
Connect the serial cable to the 1500-OEM board
and host PC as shown in
2.
From the
Connect
tab, click the
Refresh List
button to get a list of available COM ports.
3.
Use the dropdown menu and click on a COM
port to select it.
4.
Click the
Disconnected (click to connect)
button.
Figure 9: Direct Serial Connection
