Installation manual
Инструкция
по
монтажу
CSF_HW_TUBE_R_R
PN 010817
/CSF/HW/BI/EU
Rear panel installation
-
Always mount the real panel horizontally using a bubble instument.
- Fix the real panel using appropriate screws according to the type of wall.
Installation in the following place may cause malfunction. If it is unavoidable, please contact with service
center.
- Place where strong heat sources, vapors, flammable gas or volatile object are emitted.
- Place where a lot of salinities such ad coast exists.
- Place where the oil (machine oil) is contained in the air.
- Place whewre a sulfured gas such as the hot spring zones is generated.
- Other place with special circumstance.
Unit installation position selection
-
The ait inlet and outlet vent should be far from the obstruction, make sure that the air can be blown
through the whole room.
- Select a position where the condensing water can be easily drained out.
- Select a location where children can no reach.
- Select the place where is strong enough to withstand the full weight and vibrations of the unit and will
not increase the noise.
- Be sure to leave enough space to allow access for routine maintenance; the height of the installed
location should be 2,5m or more from the floor.
Rear panel installation
- Always mount the real panel horizontally using a bubble instument.
- Fix the real panel using appropriate screws according to the type of wall.
CONDENSATE DRAIN CONNECTION
5
