Installation manual
Инструкция
по
монтажу
CSF_HW_TUBE_R_R
PN 010817
/CSF/HW/BI/EU
MALFUNCTIONS AND CORRECTIVE ACTIONS
FAN DOES NOT RUN
CORRECTIVE ACTIONS:
- make sure that the machine is powered;
- check if some switches or fuses are;
- check the correct wiring of the unit (qualified personnel only) - check if the thermostat is set in the right way.
LOW AIR FLOW
CORRECTIVE ACTIONS:
- select an higher fan speed;
- replace or clean the filter.
THE APPLIANCE LEAKS WATER
CORRECTIVE ACTIONS:
- monitor and improve the insulation of the water pipes;
- tighten the water attacks;
- fix the unit perfectly horizontally;
- clean the dip tray;
- check and clean the pipe of the condensate drain;
- monitor the proper functioning of the condensate drain pump; - check the slope of the condensate
collection tray.
THE UNIT DOES NOT COOL/HEAT
CORRECTIVE ACTIONS:
- lower/raise the set temperature on the thermostat;
- check that the chiller/boiler and circulation pump are turned on; - bleed the water pipes;
- check if the thermostat is not installed in a warmer/cooler area; - clean the air filter.
Is the power cord specificed?
It may cause electric malfunction or damage the part
Is the inlet and outlet pipes beed covered?
It may cause insufficiant cooling (heating) capacity
8
