Sifam Tinsley ND20LITE, User Manual

Page: 23 / 64

23
Values are set by means of and push-buttons, however the
position of the set digit is selected by means of and push-
buttons. The active position is signaled by the cursor. The value is
accepted by the push-button and resigned by the pressure
of the push-button. During the acceptation, the value insertion
possibility in the range is checked. In case when the value is set beyond
the range, the meter remains in the parameter edition mode, however
the value is set on the maximum value (when the value is too higher) or
on the minimum value (when the value is too lower).
6.5.2. Setting of Output Parameters
Select the out mode in options and approve the choice by the
push-button.
Table 4
Item
Parameter
name
Designa
-
tion
Range Notes/ descrip
-
tion
Manufac-
turer’s value
1
Number of
impulses
Io_n
1000 ...
20000
Number of impulses for 1 kWh 5000
2
Address in
MODBUS
network
Addr 1 ... 247 1
3
Transmission
mode
trYb
r8n2,
r8E1,
r8o1,
r8n1
8n2
4 Baud rate bAUd
4.8 k, 9.6
k, 19.2 k,
38.4 k
9,6 k
5
Manufacturer’s
parameters
dEf no, yES
Restoration of manufacturer’s
parameters of the group
no