manualshive.com logo in svg

Sierra S5020, User Manual

Share
Download
Sierra S5020 User Manual Download Page 47

6

Maintenance

43

How to Walk-Test the System

A walk-test allows you to test
your system's functions without
causing an alarm.  You can be
sure your security system is
functioning properly by con-
ducting a walk-test once a
week.

The first step of a walk-test is
to place your system in walk-
test mode.  Then, walk in front
of motion sensors, and open
protected doors and windows.
Each time a sensor detects
your presence, the keypad
beeps, and names the most re-
cently faulted zone in its dis-
play.

If your system fails to detect a
sensor, exit the walk-test mode
and make sure the sensor's
zone is not bypassed.  If it is
bypassed, remove the bypass
and repeat the walk-test.  If  this
does not correct the problem,
contact your service represen-
tative.

IMPORTANT:  during a walk-
test, your building is not pro-
tected against actual alarms.

To Conduct a Walk-Test:

1.

Press and hold the 

[walk test] key for 2 seconds

until you hear 2 beeps.  You

see:

ENTER

MASTER CODE

2.

Enter the master user code.

You see:

1 WALK TEST

3.

Press the 

 key.  Test

your sensors by opening pro-

tected doors and windows,

and by walking in front of

motion sensors.  The keypad

beeps twice with each detec-

tion, and its display is simi-

lar to this:

3   WALK TEST

In this example, a fault was

noted on zone 3.

4.

When done, press the

  key.

www.ukpanels.com

Summary of Contents for S5020









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands