manualshive.com logo in svg

Sierra S5020, User Manual

Share
Download
Sierra S5020 User Manual Download Page 17

2

User Codes

13

If an intruder forces you to dis-
arm your system, this optional
code sends a silent signal to
alert monitoring station person-
nel that you are in danger.

For systems without multiple
areas, the code is assigned to
user number 15.  You can
change or delete this code like
any other user code.

Standard Code  ___
Optional Code _X_

Active Certain Days/Times ___

Duress
Code

A relay code acts like a switch.  When you enter this code, a
device that is connected to the control panel is turned on or off.
For example, your system can be programmed to switch the ex-
terior lights of your building on or off when you enter a relay code.
Relay codes must be programmed into your system by the in-
staller.

The relay code is a four-digit code that you can change or delete
like any other user code.   If you delete the relay code, you will no
longer be able to use this feature.  For systems without multiple
areas (as described in Section 7), the code is assigned to user
number 14.

Relay
Code

Standard Code  ___

Optional Code _X_

Active Certain Days/Times _X_

To Use the Duress Code:

1.

Enter the four-digit code.

Your system appears to dis-

arm normally.  However, a

message is sent to your moni-

toring station that you are in

danger.

www.ukpanels.com

Summary of Contents for S5020









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands