manualshive.com logo in svg

Sierra S5020, User Manual

Share
Download
Sierra S5020 User Manual Download Page 32

3

Arm/ Bypass

28

Optional Arming Features

Your system offers the optional arming features described below.
Refer to Section 8 to see which features are installed on your
system.

Extended Exit Delay.  This feature automatically resets the exit
delay if you re-enter the building while the system is being armed.
You may re-enter four times; each time, the exit delay is reset to
its full value.

Keypad Lockout.  Designed to prevent an intruder from guess-
ing a user code, this option causes the system to slow down if a
series of invalid user codes are entered.  Before a new user code
can be entered, the user must wait through a delay.  The delay
lengthens as more invalid codes are entered. Depending upon
your system's programming, the keypad lockout may not affect
arming.

Keyswitch Arming.  This accessory (Sierra S5051) allows you
to arm and/or disarm the system with a key.  Follow the instruc-
tions on the switch.

Quick Exit. This option allows you to exit a home-armed building
without disarming and re-arming. To start the exit delay, press
and hold the 

 [quick exit] key for 2 seconds until you hear

two beeps.  Enter your user code, then exit. (Depending on your
system's programming, a user code may not be needed.)

Exit Termination.  This option allows you to shorten the exit de-
lay to the last five seconds by pressing a button located near
your exit.

www.ukpanels.com

Summary of Contents for S5020









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands