manualshive.com logo in svg

Sierra S5020, User Manual

Share
Download
Sierra S5020 User Manual Download Page 44

5

Settings

40

How to Change the Relay 1 Days

Your system can be pro-
grammed with up to four relays
that work on the days of the
week you specify. The relays
are numbered 1, 2, 3, and 4.

The relays are programmed to
turn on or off one or more de-
vices which are connected to
your system's control panel.
You can change the days that
the relay works by following the
procedure to the right.

For example, a business may
use a relay to turn on the flood-
lights near its loading docks.
By using the relay schedule
menu, the business owner
could turn the lights off during
the business' upcoming holi-
day.

You can change the days that
the relay works by following the
procedure to the right.  To
change the time of day that the
relay works, contact your in-
staller.

To Change the Relay 1 Days:

1.

Press and hold the 

[walk test] key for 2 seconds

until you hear 2 beeps.  En-

ter the master user code.

2.

Press the 

 key 8 times

until you see:

9

3.

Press the 

 key.  You

see something like this:

3

The three spaces in the nu-

meric display represent the

first three days of the week

(Sunday-Tuesday).  If a space

contains a dash, Relay 1 is

does not work on that day.  If

the space contains a number,

Relay 1 works on that day.

Thus, in the example above,

Relay 1 works on Tuesday

and does not work on Sun-

day and Monday.  To view the

(continued)

www.ukpanels.com

Summary of Contents for S5020









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands