manualshive.com logo in svg

Sierra S5020, User Manual

Share
Download
Sierra S5020 User Manual Download Page 10

6

1

Overview

System Status Messages

The display of your icon keypad gives you information about the
status of your system.  If there is more than one condition to
report, your display switches between the messages.

Below is a list of the types of messages you might see.  On your
display, the # symbol is replaced with the number of the zone (or
zones) in question.  For more information about many of these
messages, see Section 6.

READY. 

 The system is ready to be armed.

READY ALARM ZONE #.

  

The system is ready to be armed;

however, the system's alarm memory contains a record of
an alarm.  To clear the alarm memory, press and hold the

 key for two seconds.

READY BYPASS ZONE #.

   

The system is ready to be

armed; however, the zone listed is bypassed, and therefore,
not protected.  If more than one zone is bypassed, the num-
bers of the zones are sequentially displayed.

NOT READY ZONE #. 

 The system is not ready to be

armed.  The zone number listed is faulted. (The zone may
be faulted if, for example, a door is ajar or a window is open.)
If more than one zone is faulted, the numbers of the zones
are sequentially displayed.

NOT READY TAMPER ZONE #.

  The system is not ready to

be armed.  The zone listed has been tampered with.  If more
than one zone has been tampered with, the numbers of the
zones are sequentially displayed.

www.ukpanels.com

Summary of Contents for S5020









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands