Rev 4 May.17
50
10
10: Configuring the oMG's startup and
shutdown Behavior
Startup Behavior
The oMG can be configured to turn on automatically once power has been detected
as follows:
1.
Navigate to General > Startup:
Figure 10-1: Startup Configuration Screen
2.
Set the AutoPower field to enabled.
3.
Enter a delay (in seconds) to wait before powering on. This is used to delay
powering on the unit until after a certain amount of time has elapsed after turning
on the ignition.
4.
Click Save to save the startup configuration settings.
See
on page 91 for detailed information on each field.
Shutdown Behavior
The oMG has been configured to automatically shut down after excessive or
insufficient power is detected, and when extreme temperature conditions are
countered (using the unit's built-in temperature sensor).
To adjust the Shutdown Behavior settings:
1.
Navigate to General > Shutdown.