Operation and Configuration Guide 3.14
46
4118618
4.
Configure the NMEA Messaging and TAIP Messaging if required.
If using TAIP Messaging, ensure the Enable checkbox under Additional
Options is selected.
5.
Configure the Local Forwarding options as required:
·
TCP/UDP—Allows data to be sent to the LAN using the respective
protocol
·
Serial—Allows data to be sent to a device connected to the oMG's serial
port. (The oMG’s serial port settings must match those of the receiving
system.)
Note that Serial forwarding requires that the Serial port “Use” value be set
to Application in the Devices > Serial tab.
6.
Configure the Remote Forwarding options if required—enter a space-
separated list of IP addresses or host names to send the GPS data to.
7.
Configure the Event Thresholds, which control how frequently GPS infor-
mation will be broadcast to the AMM.
8.
Click Submit.