manualshive.com logo in svg

Sierra Wireless Clear Spot 4G+, User Manual

Share
Download
Sierra Wireless Clear Spot 4G+ User Manual Download Page 62

Clear Spot 4G+ User Guide

62

2131352

Inserting a microSD Card

To insert the microSD card:

1.

Gently flip open the tab labelled "microSD" on the side of the device.

2.

Gently insert the microSD card (label facing up) into the slot on the side of the 
device, until the microSD card clicks into place.

Note: If your microSD card has not been formatted, or is in a format that your computer 
does not recognize, you may be prompted to format the microSD card. The formatting 
procedure erases all the data on the microSD card, after which the files CANNOT be 
retrieved. To prevent the loss of important data, please check the contents before you 
format the microSD card.

3.

Check the status of the microSD card. See 

"microSD Card Information and 

Settings" on page 57

.

Removing a microSD Card

1.

Ensure you and other users have completed any file transfers.

2.

Gently flip open the tab labelled "microSD" on the side of the device.

3.

Using your fingernail or a thin blunt object, gently press the microSD card in 
and then release; it should partially pop out of its slot, as shown in the 
drawing above. 

4.

Remove the microSD card and store it in a safe place.

5.

Close the tab over the microSD slot of the device.

Summary of Contents for Clear Spot 4G+









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands