Rev 002
40
AirPrime XM0110 Development Kit
Daughter Board
AirPrime XM0110 Development Kit
Daughter Board Reference Manual
Figure 26. D101 Active Antenna Power Supply Indicator
3.5.6.
TP100: GPS RESET Test-point.
TP100 is a test-point for GPS_RESET signal provides from Embedded Module to XM0110 RESET pin
(#1).
Figure 27. TP100 RESET Test-Point schematic
3.5.7.
P100: VBATT Pad for TEST / P101 GND Pad test.
In case XM0110 Development Kit Daughter Board is not supplied by Embedded Module Development
Kit, 2 pads connected to VBATT and GND are available for supplying it.
Caution:
VCC_2V8 and VCC_1V8 are needed for LED supply, SELECT resistor pull up and I²C resistors pull
up. Check on the schematic before applying external supply.
Figure 28. P100 and P101 supply test pad schematic
