Sierra Wireless AirPrime MiniCard MC73xx/8805 Series, At Command Reference

Page: 12 / 158

AirPrime MC73xx / 8805 AT Command Reference
12 Proprietary and Confidential 4114486
Diagnostic Commands —Commands used to select frequency bands and
diagnose problems.
Test Commands —Commands required to place the modem in particular modes
of operation, test host connectivity, and to configure the transmitters and receivers
for test measurements.
!PCTEMP Return current temperature information 40
!PCTEMPLIMITS Set/report temperature state limit values 41
!PCVOLT Return current power supply voltage information 42
!PCVOLTLIMITS Set/report power supply voltage state limit values 43
!POWERDOWN Power down system 44
!PRIID Set/report module PRI part number and revision 44
!REL Set/report active protocol/revision 45
!RESET Reset modem 45
!SELACQ Select RAT acquisition order 46
!SELMODE Set/return current service domain 47
!SIMRSTC Set/report SIM refresh reset notification state 47
!UDINFO Return information from active USB descriptor 48
!UDPID Set/report product ID in USB descriptor 49
!UDUSBCOMP Set/report USB interface configuration 50
&V Return operating mode AT configuration parameters 51
Table 1-2: Modem status commands (Continued)
Command Description Page
Table 1-3: Diagnostic commands
Command Description Page
!BCFWUPDATESTATUS Report status of most recent firmware update attempt 54
!ERR Display diagnostic information 55
!RXDEN Enable/disable WCDMA/LTE receive diversity 56
Table 1-4: Test commands
Command Description Page
!DAFTMACT Put modem into Factory Test Mode 60
!DAFTMDEACT Put modem into online mode from Factory Test Mode 60
!DAGGAVGRSSI Return averaged RSSI value in dBm (GSM only) 61
!DAGGRSSI Return the RSSI value in dBm (GSM only) 61