Sierra Wireless AirPrime MiniCard MC73xx/8805 Series, At Command Reference

Page: 49 / 158

Modem Status, Customization, and Reset Commands
Rev. 1 Sep.13 Proprietary and Confidential 49
!UDPID Set/report product ID in USB descriptor
Use this command to set the device’s product ID in the USB descriptor. (Some devices
may support more than one product ID.)
Note: If a custom PID is used for <app product_id>, then the <boot product_id> must
be set at the same time.
Password required:
Yes
Usage:
•
Execution:
AT!UDPID=<app product_id> [,<boot product_id>]
Response:
OK
Purpose: Set the application and boot product IDs in the USB descriptor.
•
Query:
AT!UDPID?
Response:
!UDPID:
APP: <product_id>
BOOT: <boot product_id>
OK
Purpose: Report the product ID that is stored in the USB descriptor.
•
Query List:
AT!UDPID=?
Purpose: Display a list of default (non-custom) product IDs for the device.
Parameters:
<app product_id>
•
Hexadecimal ASCII value.
•
Valid range: 0000–FFFF
< boot product_id>
•
Hexadecimal ASCII value.
•
Valid range: 0000–FFFF
•
In the Execution command format, if the <app product_id> is a custom PID>,
then the <boot product_id> must be set at the same time. (To check if the
<app product_id> is a custom PID, use AT!UDPID=? to see a list of all available
non-custom PIDs.)
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description