Sierra Wireless AirPrime MiniCard MC73xx/8805 Series, At Command Reference

Page: 18 / 158

AirPrime MC73xx / 8805 AT Command Reference
18 Proprietary and Confidential 4114486
Command reference
Table 2-2: AT command password details
Command Description
!ENTERCND Enable access to password-protected commands
Before you can use any password-protected AT commands, you must enter the password
correctly using this command. The initial password is configured onto the modem during
manufacture. You can change the password using
!SETCND . If you do not know the
password, contact your Sierra Wireless account manager
Once the password has been entered correctly, the password-protected AT commands are
available until the modem is reset or powered off and on.
Password required:
Yes—Query format only.
Usage:
•
Execution:
AT!ENTERCND=<“key”>
Response:
OK
Purpose: Unlock password-protected commands.
•
Query:
AT!ENTERCND?
Response:
<key>
(if unlocked)
Purpose: This command is password-protected. After entering the password correctly
using the execution operation (“=”), you can use this command to display
the password as a reminder.
Parameters:
<“key”> (Password stored in NV memory)
•
Password must be entered with quotation marks. (For example,
AT!ENTERCND=”ExamplePW”.)
•
Password length: 4–10 characters (0–9, A–Z, upper or lower case)
•
Characters may be entered in ASCII format, or in Hex format. (For example:
“myPass3” or “ABCDEF01234”.)
!SETCND Set AT command password
Change the password used for the !ENTERCND command. (Before you can change the
password using
!SETCND
, you must enable access to this command using
!ENTERCND
.)
Password required:
Yes
Usage:
•
Execution:
AT!SETCND=<“key”>
Response:
OK
Purpose: Sets <“Key”> as the new password for accessing protected commands.
Parameters:
<“key”> (New password)
•
Password must be entered with quotation marks (for example,
AT!SETCND=”NewPW”).
•
Password length: 4–10 characters (0–9, A–Z, upper or lower case)
•
Characters may be entered in ASCII format, or in Hex format. (For example:
“myPass3” or “ABCDEF01234”.)
Warning:
Do NOT enter a null password (that is, the <“Key”> cannot be ““) — you will NOT
be able to use password-protected commands, and will have to contact Sierra Wireless for
help to reset the password.