Sierra Wireless AirPrime MiniCard MC73xx/8805 Series, At Command Reference

Page: 61 / 158

Test Commands
Rev. 1 Sep.13 Proprietary and Confidential 61
!DAGGAVGRSSI
Note: The modem must be in
FTM mode to use this
command—use
!DAFTMACT
to enter FTM mode.
Return averaged RSSI value in dBm (GSM only)
Return an averaged RSSI (Received Signal Strength Indicator) value in dBm.
Note:
!DASBAND
must be used to set the device to a GSM band before you can use
!DAGGAVGRSSI
.
Password required:
Yes
Usage:
•
Execution:
AT!DAGGAVGRSSI=<channel>, <LNA Index>
Response:
OK
Purpose: Return the averaged RSSI for the specified channel and LNA offset
index.
Parameters:
<channel> (Channel number for the band specified using
!DASBAND
)
•
Valid values depend on the selected band
<LNA Index> (LNA offset index)
•
0=R0 (highest gain)
•
1=R1
•
2=R2
•
3=R3 (lowest gain)
!DAGGRSSI
Note: The modem must be in
FTM mode to use this
command—use
!DAFTMACT
to enter FTM mode.
Return the RSSI value in dBm (GSM only)
Return the RSSI (Received Signal Strength Indicator) value in dBm using the calibration
offsets (valid in GSM burst mode only—the command
!DAGSRXBURST puts the
modem into burst mode).
Note:
!DASBAND
and
!DASCHAN
must be issued before you can use
!DAGGRSSI
.
Password required:
Yes
Usage:
•
Execution:
AT!DAGGRSSI
Response:
Channel:<chan> LNA:<lna> RXPWR:<pwr> dBm
OK
Purpose: Return the averaged RSSI for the specified channel and LNA offset
index.
Parameters:
<chan> (Channel number for the band specified using
!DASBAND
)
•
Valid values depend on the selected band
<lna> (Current LNA state)
•
Valid range: 0–3
<pwr> (RSSI converted to dBm)
•
Signed value based on Rx power
Table 5-2: Test command details (Continued)
Command Description