Sierra Wireless AirPrime MiniCard MC73xx/8805 Series, At Command Reference, Page: 50 / 158

AirPrime MC73xx / 8805 AT Command Reference
50 Proprietary and Confidential 4114486
!UDUSBCOMP Set/report USB interface configuration
Use this command with modems that have been configured with multiple USB
compositions.
By default, devices are typically configured to use a USB composition that presents a
minimal set of interfaces. If the device also supports other compositions, this command
is used to choose from any of the supported compositions.
Password required:
Yes
Usage:
•
Execution:
AT!UDUSBCOMP=<device_comp>
Response:
OK
Purpose: Set the current composition. For the change to take effect, you must
reset the modem.
•
Query:
AT!UDUSBCOMP?
Response:
!UDUSBCOMP: <device_comp>
OK
Purpose: Report the current interface composition.
•
Query List:
AT!UDUSBCOMP=?
Response: Example response, details may differ:
0 - HIP DM NMEA AT MDM1 MDM2 MDM3 MS NOT SUPPORTED
1 - HIP DM NMEA AT MDM1 MS NOT SUPPORTED
2 - HIP DM NMEA AT NIC1 MS NOT SUPPORTED
3 - HIP DM NMEA AT MDM1 NIC1 MS NOT SUPPORTED
4 - HIP DM NMEA AT NIC1 NIC2 NIC3 MS NOT SUPPORTED
5 - HIP DM NMEA AT ECM1 MS NOT SUPPORTED
6 - DM NMEA AT QMI SUPPORTED
7 - DM NMEA AT RMNET1 RMNET2 RMNET3 SUPPORTED
8 - DM NMEA AT MBIM SUPPORTED
9 - MBIM SUPPORTED
10 - NMEA MBIM SUPPORTED
11 - DM MBIM SUPPORTED
12 - DM NMEA MBIM SUPPORTED
OK
Purpose: Report the available interface compositions (<device_comp>)—the
device can use any compositions that are listed as “SUPPORTED”.
Parameters:
<device_comp> (USB composition)
•
Integer value, 0 or greater
•
Use
AT!UDUSBCOMP=?
to view the configurations available for the device.
Available configurations are identified as “SUPPORTED”.
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description