Sierra Wireless AirPath 300, User Manual

Page: 5 / 45

AirPath 300 for Visor User Guide Preface
2130060 Rev 1.1 Page iii
WARNING (EMI) - United States FCC Information
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in an appropriate
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communication. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and
receiver
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV
technician for help
WARNING – FCC RF Exposure Guidelines
The FCC has developed guidelines to reduce any possible
hazard due to exposure of the human body to electromagnetic
radiation (i.e. to radio waves). In accordance with these
guidelines, the antenna should be positioned at a distance
greater than 9 cm (3.6") from users and bystanders
(3 cm (1.2") from hands, wrists, feet, and ankles) when the
modem is transmitting.
FCC approval number: N7NACRD2.