background image

Warranty 

AirPath 300 for Visor User Guide 

 

Page 30 

2130060 Rev 1.1

 

8.2.2. Obtaining Service 

In the event of equipment malfunction, Sierra Wireless, Inc., 
or one of its authorized agents should perform all repairs.  It is 
the responsibility of users requiring service to report the need 
for service to Sierra Wireless, Inc. or to one of its authorized 
agents. 

For warranty service or out-of-warranty repair: 

1.  Contact Sierra Wireless Technical Support (see 

www.sierrawireless.com

) to determine the nature of 

the problem.  If return of the product is required they 
will help you with the rest of this process. 

2.  Obtain a Return Material Authorization (RMA) 

number from Sierra Wireless Technical Support. 

3.  Print and fill out a Problem Report Sheet (PDF and 

Microsoft Word versions are available from the web 
site 

(

www.sierrawireless.com/SupportDownload/GeneralDocu

mentation/ProblemReportSheet.html

)

.  Remember: the 

more detailed your description of the problem, the 
faster your modem can be diagnosed and repaired. 

4.  Return the equipment, with the Problem Report Sheet 

enclosed, shipping pre-paid, to the address specified 
by the Customer Service Representative. 

Summary of Contents for AirPath 300














































Reviews: