Installation and Startup
Rev 3 Dec.16
31
3
Ignition
Sense
White
Ignition Sense: Connected to the vehicle ignition or an external
switch. The RV50 Series gateway is off when this pin is either
open-circuit or grounded, and on when this pin is connected to
power.
Note: If you do not connect pin 3 to the ignition, you MUST
connect it to the positive terminal of your power supply or
battery. If you are using a Sierra Wireless AC adapter, the
connection is inside the cable.
I
4
GPIO
Green
User configurable digital input/output or analog voltage sensing
input. Connect to switch, relay or external device. For more
information, see
Pin 4 (GPIO) — Use the green wire for I /O
configurations. See I / O Configuration on page 34.
and the ALEOS Software Configuration User Guide.
I/O
Table 3-3: Power Connector Pin and DC Cable Wires
Pin
Name
Associated DC
Cable Wire Color
Description
Type
Summary of Contents for AirLink RV50 Series
