Sierra Wireless AirLink RV50 Series, Hardware User'S Manual

Page: 14 / 78

AirLink RV50 Series Hardware User Guide
14 4117313
Gateway Configuration and Management
You can configure and manage your RV50 Series gateway using:
• ACEmanager — a browser-based gateway management application
Refer to the ALEOS Software Configuration User Guide available for down-
load at
source.sierrawireless.com .
• AirLink Management Service (ALMS) — a cloud-based gateway
management service provided by Sierra Wireless
For more information, visit www.sierrawireless.com/ALMS or contact your
Sierra Wireless distributor.
• AirLink Mobility Manager (AMM) — a Network Management solution that
provides a consolidated view of the entire vehicle fleet and enables simplified
management, control and monitoring of connected AirLink routers.
• AT Commands
For a complete list of AT Commands, refer to the ALEOS Software Configura-
tion User Guide.
Power Modes
The AirLink RV50 Series gateway has three power modes:
• On — The CPU and the radio are on. The current draw is 900 mW (75 mA @
12 VDC) when the gateway is idle (i.e. no traffic is being sent or received).
• Standby — The CPU and the radio are off, but can be woken by an I / O input
or at a configured time. Current draw is 53 mW (4.4 mA @ 12 VDC).
• Off — All power is switched off. Ignition is low, but Vin remains connected.
Current draw is 11 mW (0.9 mA @ 12 VDC).
Power Saving Features
Table 1-2 provides a quick reference to the RV50 Series power saving features.
For more information, refer to the ALEOS Software Configuration User Guide.
If you are transitioning from a Raven XT or Raven XE to the RV50 Series gateway
and require the RV50 Series gateway to operate with a comparable level of power
consumption, see
Transitioning from a Raven Gateway on page 44.