Siemens YASKAWA 830DI, Maintenance Manual, Page: 23 / 65

1.2 Outside appearance
1-4
1.2 Outside appearance
The figures are described roughly in the following subsections. Therefore, its image may be
different from the actual unit.
1.2.1 Operator panel
The operator panel has CNC unit on the rear side and they are treated as a unit.
1.2.2 CNC unit
The CNC unit is installed on the rear side of operator panel and they are treated as a unit.
„ Rear view
Table 1.1 Operator panel
General name
Type/
Order number
Specifications/
Remarks
Operator
panel
6FC5203-0AF10-
xAAx x: There are several kinds
depending on improvement
of key illustration and key
position.
USB port
LCD
Table 1.2 CNC unit
General name
Type/
Order number
Specifications/
Remarks
CNC unit 6FC5220-0AAxx
-xAA0
6FC5210-0DFxx
-xAA0 (spare part) x: There are several kinds
depending on the
performance and installed
OS.
Hard disk drive unit
Connector for external floppy disk drive
Other connectors