Siemens WM16XK75NL, User Manual

Page: 35 / 64

Child lockNL
3.
Reload or remove the laundry.
4.
Close the door.
5.
onStart/Refill
2.
Wipe the rubber sleeve dry and
remove any foreign objects.
to press.
13.8 Program Cancel
1.
onStart/Refill
2.
Open the appliance door.
to press.
At high temperature and high
water level, the appliance door
remains locked for safety reasons.
– Start the program at a high
temperatureTo rinse .
– Start the program at a high water
levelCentrifuge or select a
suitable program for draining.
→ "Programs", Page 28
3.
Leave the appliance door and detergent
drawer open to allow the residual
water to dry out.
3.
Remove the laundry.
→
"Taking out the laundry",
Page 35
14 Child Lock
Secure your device against unwanted
operation via the controls.
13.9 Resume program at
rinse hold
Requirements
sThe rinse hold is activated.
→ "Buttons", Page 26
sThe last rinse of the
The set program has ended and the
laundry is in the rinse water.
14.1 Activating child lock
▶
Both keys 3 sec.press for approx. 3
seconds.
aThe display shows
to give.
aThe controls are
blocked.
aThe childproof lock remains in effect even after the
switching on the device and activated
in the event of a power failure.
reflected
1.
The programCentrifugeor set a drain
program.
→ "Programs", Page 28
2.
onStart/Refill to press.
14.2 Deactivate child lock
13.10 Remove the laundry
Required:To deactivate the child lock,
the appliance must be switched on.
1.
Open the door.
2.
Remove the laundry from the drum
man.
▶
Press both buttons for about 3
seconds
3 sec..
13.11 Device u turn it off
1.
Press .
35