Siemens WM16XK75NL User Manual Download

Page: 28 / 64

NLPrograms

9 Programs

Remark:The care labels on the laundry give you additional information on

program selection.

Program

Description

Max.

bela-

thing

(kg)

Cotton

Wash hard-wearing cotton, linen and blended

fabrics.

Also suitable as a shortened program for normally

soiled laundry if you activate varioSpeed. Program

setting:

smax. 90 °C

smax. 1600 rpm

10.0

5.0

Eco 40-60

Wash cotton, linen and blended fabrics.

10.0

Remark:Textiles that can be washed at 40 °C to 60

°C according to the care symbol can be washed

together.

The wash result corresponds to the best possible

wash result class and complies with legal regulations.

The wash result corresponds to the best possible

wash result class and complies with legal regulations.

For this programme, the washing temperature is

automatically adjusted depending on the load

capacity in order to achieve optimum energy

efficiency with the best possible washing result. The

washing temperature cannot be changed.

Program setting:

Remark:The temperature is not adjustable in this

program and is set automatically.

smax. - °C

smax. 1600 rpm

wrinkle recovery

loin

Wash textiles made of synthetic and blended fabrics.

Program setting:

smax. 60 °C

smax. 1200 rpm

4.0

varioSpeed

Washing not possible

activated

Summary of Contents for WM16XK75NL

































































Search results

Summary of Contents for WM16XK75NL

Reviews:

Related manuals for WM16XK75NL

Brands by name

Popular brands

Siemens WM16XK75NL, User Manual

Search results

Summary of Contents for WM16XK75NL

Reviews:

Related manuals for WM16XK75NL

Brands by name

Popular brands