manualshive.com logo in svg

Siemens SONOLINE G50, Service Manual, Page: 144 / 234

Share
Download
Siemens SONOLINE G50 Service Manual Download Page 144

Page 4 of 42

7482255 Rev 01

Siemens 

October 2002

Installing or Updating the System Software

4.

If the DIMAQ-IP software will be updated, back up all exam and patient 
data to a CD before performing the DIMAQ-IP software update.

5.

If deemed necessary, uninstall the feature keys from the system according 
to the instructions provided in "Uninstalling the Product Feature Keys" 
(page 8-14).

6.

If the system software is being updated to version 1.2, update the DIMAQ-
IP software to version 1.2 

before continuing this procedure

: See "Install-

ing or Updating the DIMAQ-IP Software" (page 8-7). 

7.

Insert the MO diskette containing the version 1.2 software in the MO drive.

8.

Press the 

F4

 key to display the Preset screen shown in Figure 8-1.

!

Caution:

 If the system software will be upgraded (or downgraded to an earlier 

version) for testing or to resolve an operational problem, the feature keys for 
options that are not supported by the installed version will be lost. To avoid this 
problem, uninstall all feature keys before upgrading or downgrading the system 
software. See "Uninstalling the Product Feature Keys" (page 8-14). 

The uninstallation of all feature keys is a precaution. Experienced customer ser-
vice engineers (CSEs) may choose to leave the keys installed.

Note:

 The version 1.2 software update is described in "Installing the Version 1.2 

Software Update on the G60 S" (page 7-1)

.

Figure 8-1

Preset Screen

Scroll down to 

System/Language

 menu item.

Summary of Contents for SONOLINE G50











































































































































































































































Reviews:

No comments