manualshive.com logo in svg

Siemens SONOLINE G50, Service Manual, Page: 13 / 234

Share
Download
Siemens SONOLINE G50 Service Manual Download Page 13

Siemens 

7482255 Rev 01

Page 3 of 12

October 2002

Chapter 1 - Introduction and System Requirements

The current version of the G50 provides a choice of keyboard overlays in 
English, German, French, Spanish, and Italian.

A third array port and the DIMAQ-IP image processor are offered as options for 
the G50.

Three output devices are also available for the G50:

„

Black and white printer: P91W (Standard)

„

Color printer: CP900 (Option)

„

VCR (SVO 9500 or SVO 3500) with mounting kit and cables (Option)

1.2 The G60 S

The SONOLINE G60 S imaging system is a general purpose, high resolution, 
digital ultrasound system which uses a Microsoft Windows® operating system. 
This ultrasound system supports 2D, M-mode, pulsed-wave spectral doppler, 
color flow, power mode, and continuous wave doppler. 

The G60 S is a medium range (M3) ultrasound system designed for a wide 
variety of applications.

See Table 1-1 for a list of the G60 S features that are not included in the G50. 
See Table 1-2 for a comparison of the G50 and the G60 S specifications.

The current version of the G60 S provides a choice of keyboard overlays in 
English, German, French, Spanish, and Italian. 

The DIMAQ-IP (image processor) is provided as a standard component of the 
G60 S.

Three output devices are also available for the G60 S:

„

Black and white printer: P91W (Standard)

„

Color printer: CP900 (Option)

„

VCR (SVO 9500 or SVO 3500) with mounting kit and cables (Option)

Note:

 The Operating Instructions [kit] for the G50 includes three documents: 

Instructions for Use

, 

System Reference

, and the 

Transducer Reference

. These 

documents are available in various languages.

For information on the operation of the G50 and a detailed description of all con-
trols, consult the 

Instructions for Use

.

Note:

 See "Installation Procedure" (page A-1) for instructions on unpacking, 

installing, and licensing of the G60 S.

Note:

 The Operating Instructions [kit] for the G60 S includes three documents: 

Instructions for Use

, 

System Reference

, and the 

Transducer Reference

. These 

documents are available in various languages.

For information on the operation of the G60 S and a detailed description of all 
controls, consult the 

Instructions for Use

.

Summary of Contents for SONOLINE G50











































































































































































































































Reviews:

No comments