Revision 09/04
Comb. Mounting Units
Document No.: A5E00353789B
Page 30
3.4 Care
and
Maintenance
Combination mounting units are to be inspected depending on the environmental
conditions. If there is a high degree of dust, contamination, humidity etc., the
maintenance intervals are to be chosen respectively. These are to be kept free of course
contamination. The flat seal may not be subjected to direct streams of water. The round
surfaces of the pendulum bolts are to be greased when necessary. The overload
protection mechanism should be inspected for contamination.
3.5 Ordering
Data
Combination mounting
units for load cells with a
rated load of
Order number
0.5 t, 1 t, 2 t
7MH4 135-4DC11
5 t
7MH4 135-4KC11
The order numbers above do not include the load cells.
