manualshive.com logo in svg

Siemens SITRANS CC220, Operating Instructions Manual, Page: 57 / 80

Share
Download
Siemens SITRANS CC220 Operating Instructions Manual Download Page 57

Procedure

As soon as the device has an internet connection, time will be set by NTP. See 
chapter Administrating the network for SITRANS CC220 (Page 38).

1. Open the cover on the right.
2. Pull the plug of the battery cable 

from the motherboard.

3. Remove the battery from the bat‐

tery box.

Insert the replacement battery, plug 
in the battery cable on the mother‐
board and close the cover on the 
right.

9.1.4

Replacing SITRANS CC220

Replacing a defective SITRANS CC220

1. Stop anomaly detection models of the SITRANS MS200 assigned to the defective SITRANS 

CC220.

2. Replace defective SITRANS CC220 with new SITRANS CC220.

3. Disconnect defective SITRANS CC220 in SITRANS SCM IQ.

4. Connect new SITRANS CC220.

5. Reconnect old SITRANS MS200 with SITRANS SCM IQ to the same MindSphere asset.

6. Reset SITRANS MS200.

Resetting SITRANS MS200 (Page 51)

9.2

Maintenance and repair work for SITRANS MS200

9.2.1

Basic safety notes

The device is maintenance-free. However, a periodic inspection according to pertinent directives 
and regulations must be carried out.   

Service and maintenance

9.2 Maintenance and repair work for SITRANS MS200

Smart Condition Monitoring with IIoT Sensors
Operating Instructions, 08/2021, A5E50573389-AA

57

Summary of Contents for SITRANS CC220

















































































Reviews:

No comments