3. For USB stick specifications see chapter Technical specifications SITRANS CC220 (Page 69).
⇒ SITRANS CC220 generates and saves the public key to the USB stick. The public key will be
used later to encrypt the integration information for SITRANS CC220.
4. Wait until the USER LED is flashing orange (may take several minutes).
5. Remove the USB stick.
6. Note the MAC address from the SITRANS CC220 nameplate.
7. Plug the USB stick in your PC.
8. Start SITRANS SCM IQ in MindSphere.
9. Navigate to the "Device configuration" tab.
10.Click "Connect device".
11.Select "Connect a new gateway" and click "Next".
12.Enter a name and the MAC address for the gateway. You find the MAC address on the
SITRANS CC220 nameplate.
13.Select the public key from the USB stick.
⇒ The public key will be loaded from the USB stick.
14.Select one connection setting: "DHCP" or "Static IP".
See also chapter Administrating the network for SITRANS CC220 (Page 38).
15.Select and enter your local network connection settings and click "Save".
⇒ The onboarding key is generated and available in the download folder set in your browser
settings.
⇒ LAN interface X1P1LAN of SITRANS CC220 will be configured according to the connection
settings.
16.Move the generated onboarding key to the USB stick.
Info: Store the onboarding key on the same level right next to the public key of
SITRANS CC220.
Don't delete files from the USB stick.
17.Plug the USB stick with the onboarding key again into the USB Port of the SITRANS CC220.
18.Wait until the USER LED is indicating green (may take several minutes).
⇒ The onboarding key has been decrypted successfully.
Commissioning
7.6 Commissioning SITRANS CC220 with SITRANS SCM IQ
Smart Condition Monitoring with IIoT Sensors
42
Operating Instructions, 08/2021, A5E50573389-AA