Maintenance and service
9.4 Restoring factory setting
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001
189
9.4
Restoring factory setting
9.4.1
Effects of the factory setting
Effects of the factory setting
The following devices can be reset to the factory setting:
●
3RW50 soft starter
–
The parameters of the 3RW50 soft starter that were not set via the setting elements
are reset.
●
3RW5 communication module
–
The parameters of the 3RW5 communication module are reset.
●
3RW5 HMI High Feature
–
The parameters of the 3RW5 HMI High Feature and the PIN for access protection are
reset to the factory setting.
●
All devices
–
The 3RW50 soft starter, the 3RW5 communication module, and the
3RW5 HMI High Feature are reset to the factory settings, as described above.
Possible factory settings
The following procedures are possible:
●
With the MODE and RESET / TEST (Page 192) keys.
●
Via the 3RW5 HMI High Feature:
–
Restoring the factory settings via High Feature 3RW5 HMI (Page 190)
–
Restoring the factory settings with the Master RESET button via
3RW5 HMI High Feature (Page 191)
●
Via the local interface on the 3RW5 HMI High Feature with SIRIUS Soft Starter ES
(TIA Portal)
●
With a fieldbus via a 3RW5 communication module:
–
With SIRIUS Soft Starter ES (TIA Portal) Premium (only via a 3RW5 PROFINET or
PROFIBUS communication module).
–
"Factory settings" command in data record 93 (only via a 3RW5 PROFINET or
PROFIBUS communication module).
–
With the configuration software of the control (only via a 3RW5 PROFINET or
EtherNet/IP communication module). Only the communication parameters are reset
here.
Result
The factory setting of the selected device or all devices is restored.
