manualshive.com logo in svg

Siemens SIRIUS 3RW5 series, Equipment Manual

Share
Download
Siemens SIRIUS 3RW5 series Equipment Manual Download Page 144

Procedure

1. Make sure that the motor is switched off and that you do not start the motor while restoring 

the factory settings.
To ensure the quickest and most fault-free restoration of the factory setting, it is 
recommended that you disconnect the main voltage (operating voltage) at the 3RW5 soft 
starter.

2. Restore the factory settings.

The following procedures are possible via the 3RW5 communication module:

– Via the configuration software of controller (e.g. STEP 7) on the 3RW5 communication 

module. Only the communication parameters are reset here.

– Via SIRIUS Soft Starter ES (TIA Portal) Premium / Professional on the 3RW5 communication 

module
Brief overview: Window "Project Navigation" with current project under created Soft 
Starter > "Commissioning" > Window "Work area" > "Soft Starter > Functions > 
Commands > Factory settings"
Brief overview: Window "Project Navigation" with current project under created Soft 
Starter > "Online & Diagnostics" > Window "Work area" > "PROFINET IO ST / 
PROFINET IO HF > Functions > Reset to factory settings"

– Via data set 93 (Page 160) with the command "Factory settings"

Other possibilities for restoring the factory settings

Additional information on restoring the factory setting via the 3RW5 soft starter, via the 
3RW5 HMI High Feature or via the SIRIUS Soft Starter ES (TIA Portal) on the local interface on the 
3RW5 HMI High Feature can be found in the 3RW5 Soft Starter Equipment Manual.

Result

The factory setting of the selected device or all devices is restored.

Maintenance and service
9.3 Restoring factory settings

SIRIUS 3RW5 PROFINET communication modules

144

Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004

Summary of Contents for SIRIUS 3RW5 series























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands