Siemens SiPass integrated Reference Manual Download Page 64

Page: 64 / 66

ASP Effect States

64 | 66

A6V11144326

Category Effect Type

Property

Property Values

Description

Return to Time

Schedule

Control

True

Returns to Time

Schedule Control.

Cancel

Permanent

Override

True

Cancels Permanent

Override command.

Access Unlock

Override

Interlock

True

Override interlock and

unlock door.

Allow Access

Override

Interlock

True

Override interlock and

allow access.

Regular

Effect

Reset Reader

Tamper

True

Command to Reset

Reader tamper.

Interlock

Exclusion

Command

Include
Exclude
Exclude and

Unsecure
Exclude and Allow

Access

Perform Door Interlock

Exclusion command on

door.

Programmable

Authorization

Granted

False
True

Invoke Grant or Deny

External Authorization

command.

Anti-

Passback

Area

Regular

Effect

Reset Area

True

Command to clear all

users from the APB

Area.

Anti Passback

Mode

Hard Anti-Passback
Soft Anti-Passback
No Anti-Passback

Indicates the APB Mode

of the APB Area.

Intrusion

Zone

Regular

Effect

Force Arm

True

Arm the Native Intrusion

Area and automatically

isolate unsealed inputs.

Force Part Arm True

Part-Arm the Native

Intrusion Area and

automatically isolate

unsealed inputs

Arm

True

Arm the Intrusion Area.

Part-Arm

True

Part-Arm the Intrusion

Area.

Disarm

True

Disarm the Intrusion

Area.

Part Arm B

True

Part Arm B the SPC

Intrusion Area.

Summary of Contents for SiPass integrated



































































Search results

Summary of Contents for SiPass integrated

Reviews:

Siemens SiPass integrated, Reference Manual, Page: 64 / 66

Search results

Summary of Contents for SiPass integrated

Reviews: